tip:you could not use the first method to import.prt files from Pro/ENGINEER, that is,you cannot make the interface from ANSYS configure for import.prt files from Pro/ENGINEER to ANSYS directly.
there are 2 methods to import.prt files from Pro/ENGINEER:1. you could import iges file to the FEM program of the Pro/Mechanica.Pro/Mech.2. exporting fem file to.ans file in the FEM model process of the Pro/Mechanica.Pro/Mech.
1. open ANSYS and import iges of the maxwell.prt file to the pro/mechanica.prt of ANSYS. (you can use any iges file's you have,but i recommend you use the maxwell.prt file which came with this program)
2. select "FEM" then select "Pre-processing" or "FEM model" of the pro/mechanica.prt program of ANSYS and select "FEM" which stands for "Pro/Mechanica" of the "Pro/Mechanica" program of ANSYS.
there are 2 methods to import.prt files from Pro/ENGINEER except export iges file to ANSYS.1. when you setup ansys configuration,config the ANSYS interface for Pro/ENGINEER.then,you can import prt files to ansys directly from the interface.2. using FEM mode of the Pro/Mechanica.Pro/Mech can be used as FEM pre-processing,it can export fem model with.ans file.