Mbox 2 Pro Firmware

When the MBox 2 Pro is plugged into a computer it begins to download firmware without any indication that it is doing so. If this download is interrupted by either unplugging the Firewire cable or by a communication dropout caused by an incompatible firewire controller this firmware can become corrupt. The MBox 2 Pro will appear to be dead even when the power adapter is used without a Firewire connection.

Digidesign is providing a beta firmware and driver update to help counteract these issues. Only users experiencing a lack or loss of communication with Mbox 2 and a PowerBook G4 should use this update. If you do not have a PowerBook G4, there is no need to update your Mbox 2 firmware with this version.

To do this, proceed to the following steps. Note that you only need to do the following if you have updated your Mbox 2 firmware as above, and want to use your Mbox 2 on both a Macintosh and a Windows computer.

Minilyzer Supports AFILS MeasurementsNTI AG announces the release of the Minilyzer firmware release Version3.10, supporting induction loop measurements and extended individualharmonic distortion analysis from 2nd to the 5th harmonic. The newfirmware 3.10 is available now. All Minilyzer users can upgrade theirinstruments using the MiniLINK PC software to download the firmwarefrom the NTI Website.

The AFILS (Induction Loop Systems) mode is an extension of thestandard firmware functionality, and is available free of charge forall Minilyzer users with the MiniLINK USB interface installed. TheMinilyzer supports all calibrated AFIL sensors and displays theactually measured field strength in A/m and in dB relative to thestandardized reference of 400 mA/m. Following the AFILS IEC 60118standard, 3.10 supports level quasi peak, 10ms integration time, levelRMS, fast and slow integration time, frequency sweeps, THD+Nmeasurements, 1/3-octave spectral analysis and oscilloscope mode.

* kinetic/linux: 5.19.0-27.28 -proposed tracker (LP: #1997794) * Packaging resync (LP: #1786013) - debian/dkms-versions -- update from kernel-versions (main/2022.11.14) * selftests/.../nat6to4 breaks the selftests build (LP: #1996536) - [Config] Disable selftests/net/bpf/nat6to4 * Expose built-in trusted and revoked certificates (LP: #1996892) - [Packaging] Expose built-in trusted and revoked certificates * support for same series backports versioning numbers (LP: #1993563) - [Packaging] sameport -- add support for sameport versioning * Add cs35l41 firmware loading support (LP: #1995957) - ASoC: cs35l41: Move cs35l41 exit hibernate function into shared code - ASoC: cs35l41: Add common cs35l41 enter hibernate function - ASoC: cs35l41: Do not print error when waking from hibernation - ALSA: hda: cs35l41: Don't dereference fwnode handle - ALSA: hda: cs35l41: Allow compilation test on non-ACPI configurations - ALSA: hda: cs35l41: Drop wrong use of ACPI_PTR() - ALSA: hda: cs35l41: Consolidate selections under SND_HDA_SCODEC_CS35L41 - ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls - ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly - ALSA: hda: cs35l41: Save codec object inside component struct - ALSA: hda: cs35l41: Add initial DSP support and firmware loading - ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver - ALSA: hda: cs35l41: Support reading subsystem id from ACPI - ALSA: hda: cs35l41: Support multiple load paths for firmware - ALSA: hda: cs35l41: Support Speaker ID for laptops - ALSA: hda: cs35l41: Support Hibernation during Suspend - ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables - ALSA: hda: hda_cs_dsp_ctl: Add fw id strings - ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence - ALSA: hda: cs35l41: Support Firmware switching and reloading - ALSA: hda: cs35l41: Add module parameter to control firmware load - Revert "ALSA: hda: cs35l41: Allow compilation test on non-ACPI configurations" - ALSA: hda/realtek: More robust component matching for CS35L41 - [Config] updateconfigs for SND_HDA_CS_DSP_CONTROLS * Fibocom WWAN FM350-GL suspend error (notebook not suspend) (LP: #1990700) - net: wwan: t7...

UPDATED It turns out that one problem was I needed gstreamer0.10-plugins-bad and gstreamer0.10-plugins-really-bad. The latter comes from debian-multimedia.org, and had a file conflict with the former in Debian unstable (bug #544667 apparently just fixed). Grabbing the version from testing made it work. This fixed at least rhythmbox, exhaile and quodlibet. Thanks to Tim-Philipp Müller for the solution. 2b1af7f3a8